Features
- 24-yard capacity
- 80 yards per hour production rate
- Electric or diesel power
- Portable 60-ton cement silo
- Water meter
- Scales with weigh ticket printer
- Detachable hitch
- 2,000–4,000 gallon water tank
- 1-year warranty
- Setup and training included
- In stock
Options
- Diesel Power
- Diesel option requires an additional 120 V AC to power batch controls and printer.
- N-2200 Batch Plant 6-cylinder diesel option, refurbished engine with warranty – $8,200
- Water Meter
- All plants come standard with manual dial meter (accuracy ±2%).
- Badger manual meter option, accuracy ¼% – $4,800
- Water Pump
- The N-2200 Portable and N-3300 Portable come standard with a water pump.
- Remote Batch Controls
- Must have electronic water meter for this option.
- Place your remote batch controls and ticket printer up to 75 feet away from the plant – $2,800 (plus the cost of electronic water meter)
- Power Inverter
- If your plant is diesel powered, you will need 120 V AC to power batch controls and printer.
- If not available, this can be achieved with a 1,000-watt heavy-duty power inverter which converts 12 V DC to 120 V AC – $1,150
- Steel Plates
- (18″ x 18″ x ½″) – $1,800
- A last resort option if a concrete pad is not available to set the plant on.
- Note: It is not recommended to set your plant and silo up without a concrete pad; the ground may shift and you can damage your load cells. American Mixers & Plants is not liable for damage to load cells from sitting the plant on the ground.
- Reverse Air Load-Out Dust System
- Required in CA, TX, and coming soon in other regions; uses a three-sided enclosure at the truck and a baghouse around 5,000 CFM to control dust emissions.
- Three-sided enclosure for the rear of the truck; removes dust from the air as you load; 5,000 SCFM into dual filter bag house – $16,750
- Bag Loading Auger
- Used to load a low-profile 40-ton cement silo where pneumatic cement is not available – $9,200
- Plant Ticket Printer
- Premium ticket printer works directly from the scales on the batch plant.
- Gives the discharged weight of rock, sand, and cement only, printed on a weigh ticket or delivery ticket – $1,250
Specifications
Specifications may change without notice
- Capacity: 24 cubic yards
- Production: 80 yards per hour
- Rock: 12 cubic yards
- Sand: 12 cubic yards
- Power source: all electric
- Optional: 6-cylinder diesel
- Diesel hydraulic system flow: 45 GPM close center system (all functions of the plant are hydraulically controlled)
- Hydraulic system pressure: 2,000 PSI+ (all functions have variable speed)
- Hydraulic reservoir: 100 gallons
- Hydraulic system has start relief
- Electrical: 480 volts, 3-phase main system, current 80–100 amps
- Manual dial water meters: 23 GPM
- Maximum water pressure: 75 PSI
- Water line discharge into mixer
- Length (plant only): 42′
- Length with hitch mounted: 51′
- Length (plant with loading conveyor): 78′
- Plant output loading height: 13′
- Bin loading length: 12′
- Bin width: 8′
- Bin extension wings (bolt-on): 24″ tall
- Bin material guides: 2″ x 12″ (wood)
- Bins have adjustable material output doors
- Bin output conveyors with roller table: 26″ wide x 75″ long
- Collection conveyor: 30″ wide x 20′ long
- Conveyor belting: 3/8″ 2-ply
- Plant main frame rails have 8 adjustable legs
- 2 HP compressor – electric or hydraulic
- Detachable hitch with king pin
- 20,000 lbs tow axle, no brakes
- Maximum speed 45 mph
- No running lights
- Approximate weight: 17,000 lbs.
